8

240 Chapter 21 Yamaha DM2000
Channel Strips
Transport/Cursor Section
Control Assignment
Level Meters Displays momentary and peak levels.
Encoder Adjusts parameter selected in the AUX SELECT section.
Encoder Select
button
Pan selected: Sets pan to center position.
If MATRIX 1 on Send 1 to 8 is selected: Edits send pre/post position, activates/
deactivates send mute, or sets send level to default value.
Send Assign, Input, or Output selected: Confirms selection.
AUTO Cycles through automation modes.
With an automation mode button held down, sets this automation mode.
SEL If ENCODER MODE [ASSIGN 4] off: Selects channel.
If ENCODER MODE [ASSIGN 4] on:
 BYPASS off: Selects channel for plug-in selection.
 BYPASS on: Switches bypass status of currently selected Insert slot.
USER 4 Sets volume to unity level.
MATRIX SELECT
1
Sets volume to unity level.
SOLO Enables or disables Solo button.
USER 5 Disables Solo button for all channels.
ON Enables or disables Mute button.
USER 5 Unmutes all channels.
Channel strip
display
Displays channel name, or send, input, or output assignment.
Fader Adjusts volume, or duplicates encoder in Flip mode.
Control Assignment
REW Shuttles backward.
FF Shuttles forward.
STOP Stop
PLAY Play
USER 4 Pause
REC Record
DISPLAY
HISTORY
[FORWARD]
Selects the next tool. While held down, numerical buttons select a specific tool.
SCRUB Enables or disables Scrub mode.
SHUTTLE Enables or disables Shuttle mode.