8

238 Chapter 21 Yamaha DM2000
USER DEFINED KEYS Section
Control Assignment
DISPLAY Opens or closes the Audio Bin window.
1 Opens or closes the Transport bar window.
2 Shifts channel strips by one bank to the left.
3 Shifts channel strips by one bank to the right.
4 Shifts to second function/use of some buttons (see descriptions of other buttons).
5 While held down, value change mode is set to full: Turning the encoder to the right
sets the maximum value. Turning it to the left sets the minimum value. The encoder
also stops at its default value. Also see description of other buttons.
6 Enters Group Edit mode:
 The upper line in the display shows the name and number of the group being
edited.
 Parameter control buttons 1 to 4 switch between the properties of the group
currently being edited (names shown in lower line of display).
 When INSERT/PARAM is set to INSERT, the left and right Tab Scroll buttons move
through the group properties. At other times, they select the currently edited
group.
 The SELECT buttons activate/deactivate group membership of the channel.
USER 4 Switches to Channel view mode.
7 Activates or deactivates the Group Clutch (disables all groups).
USER 4 Switches to Extended Channel view.
8 Creates a new group and enters Group Edit mode (see above).
USER 4 Switches to Mixer view mode.
9 Switches between the Arrange and Mixer windows.
10 Shifts channel strips by one channel to the left.
11 Shifts channel strips by one channel to the right.
12 While held down, the Group Clutch is engaged (all groups are disabled).
13 While held down, value change mode is set to fine: value changes work at
maximum resolution. Also see descriptions of other buttons.
14 —
15 Performs an Undo (of the last editing operation).
USER 4 Performs a Redo (of the last undo operation).
USER 5 Opens the Undo History window.
16 Saves the project.
USER 5 Performs a Save As operation, allowing you to save the project with a different
name.