8

236 Chapter 21 Yamaha DM2000
EFFECTS/PLUG-INS Section
LCD
Control Assignment
Display Opens or closes the Sample Editor.
6 Switches display between “track name/parameter name” and “parameter name/
parameter value” modes.
7 Activates or deactivates bypass of Insert slot that is currently being edited.
8 Switches between Plug-in Assignment and Plug-in Edit modes.
Parameter Up
& Parameter
Down
Plug-in Edit mode: Shifts parameter display by the number of parameter controls in
the control surface group.
USER 13 Plug-in Edit mode: Shifts parameter display by one parameter.
Parameter
control 1–4
buttons
Pan Assignment mode:
 Parameter control 1 button centers pan.
Send Assignment mode:
 Enables/Disables Sends 1 to 4 or Mutes 5 to 8.
Plug-in Assignment mode:
 Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and enters Plug-in
Edit mode for the selected Insert slot.
Plug-In Edit mode:
 Sets value to default, or sets bi-polar switch on/off.
Parameter
controls
Pan Assignment mode:
 Parameter control 1 edits pan.
Send Assignment mode:
 Control Send 1 to 4 or 5 to 8 Level.
Plug-in Assignment mode:
 Assigns Insert 1 to 4 or 5 to 8.
Plug-in Edit mode:
 Sets value to default.
Display Assignment
LCD Displays parameter details, plug-in selection, or plug-in parameters.
TIME CODE Active if counter is displaying SMPTE time code.
BEATS Active if counter is displaying bars/beats/divisions/ticks.
Counter Displays SMPTE time code or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows:
Pan, Snd1 to Snd8, S1As to S8As, In, Out.