8

230 Chapter 20 Yamaha DM1000
DAW GROUP STATUS Enters Group Edit mode:
 The upper line in the display shows the name and number of the group
being edited.
 Parameter control buttons 1 to 4 switch between the properties of the
group currently being edited (names shown in lower line of display).
 When INSERT/PARAM is set to INSERT, the left and right Tab Scroll buttons
move through the group properties. At other times, they select the
currently edited group.
 The SELECT buttons activate/deactivate group membership of the
channel.
DAW SHIFT/ADD Switches to Channel view.
DAW SUSPEND Enables or disables the Group Clutch.
DAW SHIFT/ADD Switches to Extended Channel view.
DAW CREATE GROUP Creates a new group and enters Group Edit mode (see above).
DAW SHIFT/ADD Switches to Mixer view.
DAW WIN MIX/EDIT Switches between the Arrange and Mixer windows.
DAW CHANNEL - Shifts channel strips by one channel to the left.
DAW CHANNEL+ Shifts channel strips by one channel to the right.
DAW CTRL/CLUTCH While held down, the Group Clutch is engaged (all groups are disabled).
DAW ALT/FINE While held down, value change mode is set to fine: value changes work at
maximum resolution. Also see description of other buttons.
DAW MONI STATUS —
DAW UNDO Performs an undo (of the last editing operation).
DAW SHIFT/ADD Performs a redo (of the last undo operation).
DAW OPTION/ALL Opens the Undo History window.
DAW SAVE Saves the project.
DAW WIN MEM-LOC Opens or closes the Marker List.
DAW OPTION/ALL Performs a Save As operation, allowing you to save the project with a
different name.
DAW EDIT TOOL Selects the next tool. While held, numerical buttons select a specific tool.
DAW WIN INSERT Opens or closes the Sample Editor.
DAW REC/RDY ALL Disables Record Enable buttons of all channels.
DAW SCRUB Enables or disables Scrub mode.
DAW SHUTTLE Enables or disables Shuttle mode.
DAW REW Shuttles backward.
DAW FF Shuttles forward.
DAW STOP Stop
DAW PLAY Play
DAW SHIFT/ADD Pause
Control Assignment