8

Chapter 20 Yamaha DM1000 229
Channel Strips
Stereo Channel Strip
USER DEFINED KEYS Section
These keys can be assigned to the following functions:
Control Assignment
Level Meters Display momentary and peak level.
Encoder Adjusts parameter selected in the AUX SELECT section.
Encoder Select button Pan selected: Sets pan to center position, if MATRIX 1 on.
Send 1 to 8 selected: Edits send pre/post position, activates/deactivates
send mute, or sets send level to default value.
Send Assign, Input, or Output selected: Confirms selection.
SEL If AUTO off:
 AUX [AUX 8] off: Selects channel.
 AUX [AUX 8] on: Selects channel for insert assignment.
If AUTO on:
 Cycles through automation modes. With an automation mode button held
down, sets this automation mode.
DAW SHIFT/ADD Sets volume to unity level.
MATRIX SELECT 1 Sets volume to unity level.
SOLO Enables or disables Solo button.
DAW OPTION/ALL Disables Solo button of all channels.
ON Enables or disables Mute button.
DAW OPTION/ALL Unmutes all channels.
Fader Adjusts volume, or duplicates encoder assignment in Flip mode.
Control Assignment
AUTO Switches channel strip SEL buttons between channel and insert selection
duties.
Control Assignment
DAW WIN STATUS Opens or closes the Audio Bin.
DAW REC/RDY 1 to 16 Enables or disables Record Enable button of channel.
DAW WIN TRANSPORT Opens or closes the Transport bar window.
DAW BANK- Shifts channel strips by one bank (a bank is a group of channels or
parameters) to the left.
DAW BANK+ Shifts channel strips by one bank to the right.
DAW SHIFT/ADD Enables a second function/use for some buttons.
DAW OPTION/ALL While held down, value change mode is set to full: Turning the encoder to
the right sets the maximum value. Turning it to the left sets the minimum
value. The encoder also stops at its default value. Also see description of
other buttons.