8

226 Chapter 20 Yamaha DM1000
Assignment Overview
A modifier button (such as SHIFT) shown below a button description indicates that the
button has an alternate function, while holding down this modifier.
DISPLAY ACCESS Section
AUX SELECT Section
Control Assignment
DISPLAY Opens or closes the Sample Editor.
AUTOMIX While held, the channel strip displays show the automation mode of the
selected channel.
PAIR/GROUP Enters Group Edit mode:
 The upper line in the display shows the name and number of the group
being edited.
 Parameter control buttons 1 to 4 switch between properties of the
currently edited group (name shown in lower line of LCD).
 When INSERT/PARAM is set to INSERT, the left and right Tab Scroll buttons
move through the group properties. Otherwise, it selects the group for
editing.
 The SELECT buttons enable/disable group membership of the channel.
DAW SHIFT/ADD Switches to Channel view.
METER Clears Overload LEDs.
DAW SHIFT/ADD Switches to Mixer view, and displays MIDI channels.
DAW ALT/FINE Opens or closes Arrange window.
EFFECT Opens or closes Sample Editor.
Control Assignment
AUX 1 Assigns Send 1 level to encoders, and Send 1 to 4 levels to display encoders.
While held, the channel strip displays show the current Send 1 destination
assignment.
DAW SHIFT/ADD As above, for Send 6.
AUX 2 As above, for Send 2.
DAW SHIFT/ADD As above, for Send 7.
AUX 3 As above, for Send 3.
DAW SHIFT/ADD As above, for Send 8.
AUX 4 As above, for Send 4.
AUX 5 As above, for Send 5.
AUX 6 Switches encoder buttons between normal behavior and setting default
value.
AUX 8 Determines mode of channel strip SEL buttons when channel strip AUTO
button is off:
 Indicator off: Channel selection.
 Indicator on: Insert selection.