8
Table Of Contents
- Logic Express 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Express
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
Chapter 18 Yamaha 01V96 217
DAW GROUP STATUS Enters Group Edit mode:
 The upper line in the display shows the number and name of the group
currently being edited.
 Parameter control buttons 1 to 4 switch between properties of the
currently edited group. Group name is shown in the lower line.
 When INSERT/PARAM is set to INSERT, the left and right Tab Scroll buttons
scroll through the group properties. At other times, it selects a group for
editing.
 The SELECT buttons enable/disable group membership of the channel.
DAW SHIFT/ADD Switches to Channel view.
DAW SUSPEND Enables or disables the Group Clutch.
DAW SHIFT/ADD Switches to Extended Channel view.
DAW CREATE GROUP Creates a new group, and enters Group Edit mode (see above).
DAW SHIFT/ADD Switches to Mixer view.
DAW WIN MIX/EDIT Switches between the Arrange and Mixer windows.
DAW CHANNEL – Shifts channel strips by one channel to the left.
DAW CHANNEL+ Shifts channel strips by one channel to the right.
DAW CTRL/CLUTCH While held down, the Group Clutch is engaged (all groups are disabled).
DAW ALT/FINE While held down, value change mode is set to fine: value changes work at
maximum resolution. Also see description of other buttons.
DAW MONI STATUS —
DAW UNDO Performs an Undo (of the last editing operation).
DAW SHIFT/ADD Performs Redo (of the last Undo operation).
DAW OPTION/ALL Opens Undo History window.
DAW SAVE Saves the project.
DAW WIN MEM-LOC Opens or closes the Marker List.
DAW OPTION/ALL Performs a Save As operation, allowing you to save the project with a
different name.
DAW EDIT TOOL Selects the next tool. While held, numerical buttons select a specific tool.
DAW WIN INSERT Opens or closes the Sample Editor.
DAW REC/RDY ALL Disable Record Enable for all channels.
DAW SCRUB Enables or disables Scrub mode.
DAW SHUTTLE Enables or disables Shuttle mode.
DAW REW Shuttles backward.
DAW FF Shuttles forward.
DAW STOP Stop
DAW PLAY Play
DAW SHIFT/ADD Pause
DAW REC Record
Control Assignment