8

216 Chapter 18 Yamaha 01V96
Channel Strips
Stereo Channel Strip Section
User Defined Keys Section
These keys can be assigned to the following functions:
Control Assignment
Level Meters Display momentary and peak level.
SEL If AUTO off:
 FADER MODE [AUX 8] off: Selects channel.
 FADER MODE [AUX 8] on: Selects channel for insert assignment, allowing you
to insert effects.
If AUTO on:
 Cycles through automation modes. Sets the selected mode when an
automation mode button is held down.
DAW SHIFT/ADD Sets volume to unity level.
SOLO Enables or disables Solo button.
DAW OPTION/ALL Disables Solo button of all channels.
ON Enables or disables Mute button.
DAW OPTION/ALL Unmutes all channels.
Fader Adjusts volume, or duplicates encoder (assigned to Parameter wheel) in Flip
mode.
Control Assignment
SEL Switches channel strip SEL buttons between channel strip and insert selection
duties.
Control Assignment
DAW WIN STATUS Opens or closes the Audio Bin window.
DAW REC/RDY 1 to 16 Enables or disables Record Enable button of channel.
DAW WIN TRANSPORT Opens or closes the Transport bar window.
DAW BANK– Shifts channel strips by one bank (a bank is group of channels or
parameters) to the left.
DAW BANK+ Shifts channel strips by one bank to the right.
DAW SHIFT/ADD Shifts to second use of some buttons. See descriptions of other buttons.
DAW OPTION/ALL While held down, value change mode is set to full: Turning the encoder to
the right sets the maximum value. Turning it to the left sets the minimum
value. The encoder also stops at its default value. Also see description of
other buttons.