8

214 Chapter 18 Yamaha 01V96
LCD
The LCD displays different data, depending on the page selected with the F2, F3, and
F4 buttons:
Insert Display Mode
Press the [F2] button to select Insert Display mode. In this mode, the LCD displays
parameters, allowing you to edit effects. This mode also allows you to switch between
different Insert slots, enabling editing of each effect plug-in.
Display Assignment
TIME CODE option Active if counter is displaying SMPTE time code.
FEET Not assigned.
BEATS option Active if counter is displaying bars/beats/divisions/ticks.
Counter display Displays either SMPTE time code or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows:
Pan, Snd1 to Snd8, S1As to S8As, In, Out.
ASSIGN —
COMPARE Switches display between “track name/parameter name” and “parameter name/
parameter value” modes.
BYPASS Switches bypass status of effect currently being edited.
INSERT/PARAM Switches between Effect Assign and Effect Edit modes.
Pressing Rotary
controls 1 to 4
Pan Assign mode:
 Rotary control 1 centers pan.
Send Assign mode:
 Enables/disables Sends 1 to 4 or Mutes 5 to 8.
Effect Assign mode:
 Confirms the effect selection for Insert slots 1 to 4 or 5 to 8, and enters Effect
Edit mode for the selected Insert slot.
Effect Edit mode:
 Sets value to default, or toggles buttons with two states.
Moving rotary
controls 1 to 4
Pan Assign mode:
 Rotary control 1 edits Pan.
Send Assign mode:
 Controls the send level of Sends 1 to 4 or 5 to 8.
Effect Assign mode:
 Chooses Insert slot 1 to 4 or 5 to 8.
Effect Edit mode:
 Sets value.