8

17
207
17 Tascam US-428 and US-224
Setting Up Your Tascam US-428 and US-224
The following section outlines the steps required to use your Tascam US-428 or US-224
control surfaces with Logic Express.
To set up your Tascam US-428 or US-224 devices in Logic Express:
1 Install the latest version of the driver software needed for the US-428 and US-224.
2 Ensure that your US-428 or US-224 units are connected to the computer via USB.
3 Open Logic Express.
The units will be scanned for, and installed, automatically.
Assignment Overview
A modifier button (such as NULL) shown below a button description indicates that the
button has an alternate function/use, while holding down this modifier.
Note: The US-224 only offers four channel strips and Transport controls, but lacks the
EQ, and Master sections (excluding the NULL button and data wheel) of the US-428.
Many operations listed below are specific to the additional controls of the US-428, and
cannot be performed with the US-224.