8

Chapter 15 Tascam FW-1884 197
Master Section
Control Assignment
Cursor buttons Identical to (but independent from) the computer keyboard arrow keys—
except when encoders are in EQ, Plug-in or Instrument Edit modes (see above).
SHIFT Horizontally or vertically Zoom in and out (of the window with key focus).
SHTL Enables Shuttle mode for wheel.
Wheel Shuttle mode off: moves playhead by one bar.
Shuttle mode on: shuttles playhead.
Bank LEDs Show currently selected fader bank. If you only have an FW-1884, a bank refers
to eight channels. If you have FE-8 extensions added, a bank encompasses the
total number of (physical) channel strips: 16, 24, and so on.
If no LED is lit, bank 5 or higher is selected.
< BANK Shifts fader bank down by one bank.
SHIFT Shifts fader bank down by one channel.
SET Switches to Mixer (multi channel) view (driver version 1.20 or higher required).
BANK > Shifts fader bank up by one bank.
SHIFT Shifts fader bank up by one channel.
SET Switches to Mixer view and shows all Aux and Output channels (driver version
1.20 or higher required).
<< LOCATE Goes to previous marker.
SET Deletes the current marker (driver version 1.20 or higher required).
LOCATE >> Goes to next marker.
SET Creates a new marker at the playhead position (driver version 1.20 or higher
required).
NUDGE buttons Nudges the selected event/region left or right (by the current nudge value).
SET Chooses the current nudge value: tick, division, denominator, bar, frame, 1/2
frame.
SET Modifier for other buttons.
IN Moves playhead to left locator position.
SET Sets left locator at current playhead position.
SHIFT Sets punch In locator at current playhead position.
OUT Moves playhead to right locator position.
SET Sets right locator at current playhead position.
SHIFT Sets punch Out locator at current playhead position.
REW As per Rewind key command.
FFWD As per Forward key command.
STOP Stops playback.
PLAY Starts playback.
REC As per Record key command.