8

184 Chapter 14 Roland SI-24
Assignment Overview
A modifier button (such as SHIFT) shown below a button description indicates that the
button has an alternate function/use, while holding down this modifier.
Channel Strips
Control Assignment
EQ ON/OFF 1
to 4
In Pan mode:
 Switches the bypass state of EQ bands 1–4.
 Enters EQ/Send mode. If no Channel EQ is present on the selected channel, it is
automatically inserted.
In EQ/Send mode:
 Switches the bypass state of EQ bands 1–4. The button LED is lit when the EQ is
enabled.
In Plug-in mode:
 Switches between Inserts 1–4. A lit button LED indicates the selected insert slot.
 If a Plug-in window is open, it will update to reflect the plug-in parameters of the
selected insert slot.
SHIFT In EQ/Send mode: Enables/Disables Send 1–4 Mute.
EQ/SEND Switches Channel view modes between:
 EQ/Send Edit mode (LED on).
 Pan Edit mode (LED off).
PLUG-IN Switches Channel view modes between:
 Plug-in Edit mode (LED on) (Plug-in window opens.)
 Pan Edit mode (LED off)
Plug-in window closes when Plug-in Edit mode is exited.
SHIFT Switches Channel view modes between:
 Instrument Edit mode (LED on) (Instrument window opens.)
 Pan Edit mode (LED off)
Instrument plug-in window closes when Instrument Edit mode is exited.
PAN 1 to 12 In Pan Edit mode:
 Controls channel strip Pan/Balance.
In EQ/Send mode:
 1/3/5/7: Control the Gain parameter of EQ bands 1–4.
 2/4/6/8: Control the Frequency parameter of EQ bands 1–4.
 9–12: Control Send 1–4 levels.
In Plug-in Edit mode:
 1–10: Edits plug-in parameter.
 11: Bypasses the plug-in.
 12: Shifts plug-in parameter page (a page is a collection of parameters).
In Instrument mode:
 1–10: Edits Instrument parameter.
 11: Bypasses the instrument plug-in.
 12: Shifts Instrument parameter page.
SHIFT In EQ/Send mode:
 2/4/6/8: Control the Q-Factor of EQ bands 1–4.
 9–12: Determine Send 1–4 destinations.