8

Chapter 12 Mackie HUI 173
STATUS/GROUP Section
EDIT Section
Time Display
Control Assignment
AUTO While held down, the scribble strips display the automation mode of all channels.
MONITOR —
PHASE—SHIFT Switches to Single view.
GROUP Enters Group Edit mode:
 The upper line (in the DSP Edit section) displays the number and name of the
group being edited.
 DSP Select buttons 1 to 4 switch between the properties of the group being
edited. The group name is shown in the lower line.
 When the INSERT/PARAM button is off, the DSP Edit V-Pots scroll through the
group properties. If the INSERT/PARAM button is on, the DSP EDIT V-Pots select
the group that you’d like to edit.
 The SELECT buttons enable/disable group membership of the channel.
SHIFT/ADD Switches to Channel view.
CREATE Creates a new group and enters Group Edit mode (see above).
SHIFT/ADD Switches to Mixer view.
SUSPEND Activates or deactivates the Group Clutch.
SHIFT/ADD Switches to Tracks view.
Control Assignment
CAPTURE —
SEPARATE —
CUT Cuts the selection (of regions or events).
COPY Copies the selection.
PASTE Pastes the Clipboard contents.
DELETE Deletes the selection.
Control Assignment
TIME CODE Lit if counter is displaying SMPTE time code.
FEET Not assigned.
BEATS Lit if counter is displaying bars/beats/divisions/ticks.
Time display Switches between a SMPTE time code or bars/beats/divisions/ticks display.
RUDE SOLO
LIGHT
Flashes if any channel is soloed.