8

Chapter 12 Mackie HUI 167
Fader Bank Buttons
WINDOW Section
DEFAULT Hold this button down to switch the V-Select buttons between: standard
operation, and setting default values.
ASSIGN When V-Pots display a send level, the ASSIGN button switches them to Send
Destination Assignment mode (choosing a bus, in other words). Press the V-Select
to confirm the assignment.
The DSP V-Pots display the assignments of Send slots 1–4 or Send slots 5–8.
Confirm any changes by pressing the V-Select button—or all changes will be lost
when you leave Send Destination Assignment mode, or press the Assign button a
second time.
Control Assignment
Control Assignment
Bank Left Shifts channel strips by one bank (a group of channel strips or parameters) to the
left.
Bank Right Shifts channel strips by one bank to the right.
Channel Left Shifts channel strips by one channel (or parameter) to the left.
Channel Right Shifts channel strips by one channel to the right.
Control Assignment
TRANSPORT Opens or closes the Transport bar window.
EDIT Opens or closes the Arrange window.
MIX Opens or closes the Mixer.
ALT Opens or closes the Sample Editor.
STATUS Opens or closes the Audio Bin.
MEM-LOC Opens or closes the Marker List.