8
Table Of Contents
- Logic Express 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Express
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
162 Chapter 11 Mackie C4
Channel Strip Overlay
The channel strip overlay is active when the CHAN STRIP button light is on.
 V-Pot/V-Select row 1 edits the frequency and gain of EQ bands 3 to 6 (the parametric
bands), provided an EQ effect is inserted in the current channel strip.
 V-Pot/V-Select row 2 switches to Effect Edit mode for Inserts 1 to 8, provided an
effect is inserted in the respective Insert slot. If no effect is inserted, turn the
respective V-Pot to select an effect, then press the V-Select, to insert it.
 V-Pot/V-Select row 3 edits Send 1 to 8 Level, provided the current channel has active
sends.
 V-Pot/V-Select 25 switches to Instrument Edit mode, provided the selected channel is
routed to an instrument channel, and an instrument plug-in is inserted.
 V-Pot/V-Select 26 edits the channel output destination.
 V-Pot/V-Select 27 sets the automation mode.
 V-Pot/V-Select 28 edits group membership.
 V-Pot/V-Select 29 edits volume.
 V-Pot/V-Select 30 edits pan.
 V-Pot/V-Select 32 sets the channel input format.
Function Overlay
The Function overlay is active when the FUNCTION button light is on.
Control Assignment
1 (display: Inspct) Enables/disables the Inspector of the window with key focus.
2 (Channl Strip) Enables/disables the Lists area display in the Arrange window.
2 (Channel Strip)-Option Enables/disables the Media area display in the Arrange window.
3 (Delay in ms) Activates/deactivates display of delays in milliseconds.
4 (Ruler: SMPTE) Activates/deactivates SMPTE display of ruler.
5 (Global Track) Activates/deactivates display of Global tracks.
6 (Arrang Grid) Activates/deactivates display of the Arrange window grid.
7 (Event Float) Activates/deactivates display of the Event List.
8 (Name/Value) Switches the display mode between Name and Value (identical to the
NAME/VALUE button on the Mackie Control).
9 (Track Autom.) Enables/disables display of track automation in the Arrange window.
10 (Trk>Rg Autom.) Performs Move Current Track Automation Data to Region key command.
With the OPTION button held down (display: Trk>Ob Au All), the Move
All Track Automation Data to Region key command is executed.
11 (Rg>Trk Autom.) Performs Move Current Region Data to Track Automation function.
With the OPTION button held down (display: Ob>Trk Au All), Move All
Region Control Data to Track Automation key command is executed.