8

Chapter 11 Mackie C4 161
TRACK L/R
In Mixer view, TRACK L/R shifts the fader bank left or right by the number of channel
strips in the control surface group. As an example: If you have two C4 units in a control
surface group, the view shifts by 16 channels.
Simultaneously pressing TRACK L or TRACK R and OPTION moves to the first or last
group of channels in the project (or parameter pages, if in an edit mode). As an
example, if you are viewing the first eight channels (of 64) in the fader bank, pressing
OPTION and TRACK L or TRACK R will show the last eight channels in the fader bank
(channels 57 to 64).
In Channel view, TRACK L/R selects the previous or next channel. With SHIFT held
down: behaves as above, but only affects the Split Lower group (if Split mode is
active).
SLOT UP/DOWN
Selects the desired EQ, Send, or Insert slot.
Marker Overlay
The Marker overlay is active when the MARKER button light is on.
 V-Selects 1 to 30 are assigned to markers 1 to 30. The upper LCD line shows the
marker name; the lower line displays INSIDE when the playhead falls within marker
boundaries.
 V-Select 31 creates a new marker.
 V-Select 32 deletes the current marker.
Track Overlay
The Track overlay is active when the TRACK button light is on.
 V-Select 1 to 32 changes the currently edited track/channel. When a track/channel is
selected for Split Upper, the lower LCD line displays the word UPPER. If a track/
channel is selected for Split Lower, the word LOWER is shown.
To select a track/channel for Split Upper, press the appropriate V-Select.
To select a track/channel for Split Lower, press the V-Select while holding down SHIFT .
 BANK Left/Right shifts the fader bank by the number of channels in the control
surface group.
 SINGLE Left/Right shifts the fader bank by one channel.