8

Chapter 11 Mackie C4 157
Instrument Edit View
In Instrument Edit View:
 V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible.
 BANK Left/Right shifts the edited parameters by one page.
 In Split mode, this applies to Split Upper.
 When holding down SHIFT, this applies to Split Lower.
 SINGLE Left/Right shifts the edited parameters by 1.
 In Split mode, this applies to Split Upper.
 When holding down SHIFT, this applies to Split Lower.
To access Instrument Edit view:
m Access Instrument Assign Mixer view, then insert or select an instrument (see section
above for details).
This automatically switches to Instrument Edit view.
Cycle View
Holding the CHAN STRIP button and pressing V-Select 31 activates Cycle view. In this
mode, the V-Pots/V-Selects behave as follows:
 V-Pot/V-Select 1 (labeled Cycle): Shows and edits the current Cycle mode status (off
or on).
 V-Select 2 (labeled BySet): Matches the cycle area to selections made in the Arrange
window (selected audio or MIDI regions).
 V-Pot 3 (labeled Move): Moves the current cycle area by a bar with each click of the
V-Pot, when turned.
 V-Pot 4: Moves the current cycle area by a beat with each click of the V-Pot, when
turned.
 The display shows the left and right locators above V-Pots 5 and 7.
 Pressing V-Select 5 picks up (uses) the current playhead position for the left locator.
 Turning V-Pot 5 changes the left locator position by bars.
 Turning V-Pot 6 changes the left locator position by beats (denominator steps).
 Pressing V-Select 7 picks up (uses) the current playhead position for the right locator.
 Turning V-Pot 7 changes the right locator position by bars.
 Turning V-Pot 8 changes the right locator position by beats (denominator steps).