8

156 Chapter 11 Mackie C4
Effect Edit View
In Effect Edit view:
 V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible (see below).
 The SLOT UP/DOWN buttons select the desired Insert slot.
 BANK Left/Right shifts the edited parameters by one page.
 In Split mode, this applies to Split Upper.
 When holding down SHIFT, this applies to Split Lower.
 SINGLE Left/Right shifts the edited parameters by 1.
 In Split mode, this applies to Split Upper.
 When holding down SHIFT, this applies to Split Lower.
To access Effect Edit view:
m Access Effect Assign Mixer view, then insert or select an effect (see section above for
details).
This automatically switches to Effect Edit view.
Instrument Assign Mixer View
In Instrument Assign Mixer view, the C4 displays the Instrument slots of the selected
instrument channels.
 Turn a V-Pot to select an instrument (this browses through the software instruments
listed in the Instrument Plug-in menu).
 Press the respective V-Select to insert the chosen instrument. This enters Instrument
Edit view, where you can edit instrument parameters. See the section below for more
information.
 The TRACK L and TRACK R buttons shift the fader bank by the number of channel
strips in the control surface group.
 Holding SHIFT and pressing a V-Select switches the bypass state of the respective
Instrument slot. An asterisk precedes the name of bypassed instruments.
To access Instrument Assign Mixer view:
1 Hold the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 22 (labeled Instru Mixer).