8

Chapter 11 Mackie C4 153
Channel Strip Mixer View
In Channel Strip Mixer view, the row order is reversed, so that the lowest row edits
parameter 1.
V-Pot row 4 (bottom row) edits the currently chosen channel parameter. Row 3 edits
channel parameter 2, Row 2 edits channel parameter 3, and row 1 (top) edits channel
parameter 4.
The V-Pots edit the following channel parameters in this order: volume, pan, input
format, input assignment, output assignment, automation mode, group, displayed
automation parameter.
To edit non-visible parameters:
m Press the BANK Left/Right or SINGLE Left/Right buttons to change the parameter
shown, and edited in row 4.
The parameters shown in rows 1 to 3 will be adjusted accordingly.
To access Channel Strip view:
1 Hold the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 17.
EQ Mixer View
In EQ Mixer view:
 Row 1 sets the selected EQ band bypass state.
 Row 2 edits the selected EQ band frequency.
 Row 3 edits the selected EQ band gain/slope.
 Row 4 edits the selected EQ band Q factor.
 The SLOT UP/DOWN buttons select the EQ band.
Note: This only works if a Channel EQ is inserted in the selected channel strip.
To access EQ Mixer view:
1 Hold the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 19 (labeled EQ Mixer).