8
Table Of Contents
- Logic Express 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Express
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
148 Chapter 10 Mackie Baby HUI
Assignment Overview
If SHIFT is shown below a button description, it indicates that the control has an
alternate use while holding down this modifier.
Channel Strips
Encoder Assignment Section
Automation Section
Control Assignment
Rotary encoder Adjusts the parameter selected in the Encoder Assignment section.
Rotary encoder
push button
Selects a channel strip.
SHIFT Turns Record Enable button of selected channel on/off.
Signal indicator Illuminates when a signal is present in the channel. It also indicates channel
selection.
SOLO Enables or disables Solo.
MUTE Enables or disables Mute.
Fader Adjusts volume.
Control Assignment
PAN Assigns pan to rotary encoders.
SEND 1 Assigns Send 1 level to rotary encoders.
SEND 2 Assigns Send 2 level to rotary encoders.
SEND 3 Assigns Send 3 level to rotary encoders.
SEND 4 Assigns Send 4 level to rotary encoders.
Control Assignment
BYPASS/OFF Sets selected channel to Off automation mode.
SHIFT Enables or disables playback and recording of level (volume) automation.
READ Sets selected channel to Read automation mode.
SHIFT Enables or disables playback and recording of mute automation.
WRITE Sets selected channel to Write automation mode.
SHIFT Enables or disables playback and recording of pan automation.
TOUCH Sets selected channel to Touch automation mode.
SHIFT Enables or disables playback and recording of send level automation.