8

144 Chapter 9 Korg microKONTROL and KONTROL49
Send Mode
This mode is enabled by pressing SCENE and Pad 10. In Send mode, the channel strip
encoders control the send (amount) level for the selected send. The Pads remain in the
currently selected mode.
Send Overlay
Pressing SETTING, while the encoders are in Send mode, changes the operation of the
Pads in Send mode.
Effect Edit Mode
This mode is enabled by pressing SCENE and Pad 13. In Effect Edit mode, the channel
strip encoders control the parameters of the currently selected effect. The Pads remain
in the currently selected mode.
Effect Edit Overlay
Pressing SETTING while the encoders are in Effect-in Edit mode changes the operation
of the Pads in Effect Edit mode.
Main Section
The main LCD shows information on the current mode of the encoders.
The LCD backlight is red while recording, and green at other times.
Pad Assignment
1–8 Switches the send bypass state (of the currently selected send) for the eight
channel strips.
9–16 Switches the send position (pre/post fader) of the currently selected send, for
the eight channel strips.
Pad Assignment
1–8 Switches the effect bypass state (of the currently selected Insert slot) for the
eight channel strips.
Display text Meaning
<Instrument name> Encoders edit instrument parameters.
<Plug-in name> Encoders edit effect parameters (xx indicates the currently selected Insert slot).
Automatn Encoders set the automation mode.
Ins. x (SETTING held down) Main encoder chooses the Insert slot number.
ModePad? Displayed while SCENE button is held down.
Pan Encoders control pan.
Send x Encoders control send level of send x.
User 6 Channel Strip User Mode 6. Encoders are initially unassigned.
User 7 Channel Strip User Mode 7. Encoders are initially unassigned.
User 8 Channel Strip User Mode 8. Encoders are initially unassigned.