8

142 Chapter 9 Korg microKONTROL and KONTROL49
Assignment Overview
A modifier button, such as SHIFT (shown below a button description), indicates that the
button has an alternate meaning, while holding down this modifier.
Pads
The Pads can operate in one of eight modes, and three overlays. While pressing SCENE,
the Pads allow you to select modes for the Pads and channel strips. Releasing SCENE
without pressing a Pad does not affect the currently selected Pad or channel views.
Transport Mode
This mode is enabled by pressing SCENE and Pad 1.
Pad Assignment
1 Switches Pads to Transport mode.
2 Switches Pads to Solo/Mute mode.
3 Switches Pads to Rec/Select mode.
4–8 Switches Pads to User 4–8 mode.
These modes have unassigned Pads. You can assign them to key commands
with the Learn function.
9 Switches channel strips to Pan mode.
10 Switches channel strips to Send mode.
11 Switches channel strips to Automation mode.
12 Switches channel strips to Instrument Edit mode.
13 Switches channel strips to Effect Edit mode.
14–16 Switches channel strips to User 6–8 mode.
These modes have unassigned encoders. You can assign them with the
Logic Express Learn function.
Pad Assignment
1 Sets main encoder to Transport mode.
2 Sets main encoder to Scrub mode.
3 Sets main encoder to Shuttle mode.
7 Switches sync between internal and external.
8 Enables/disables metronome click (separately for Playback and Record).
9 Enables/disables Cycle mode.
10 Enables/disables Autopunch mode.
11 Enables/disables Replace mode.
12 Enables/disables Solo.
13 R e c o r d
14 Pause