8
Table Of Contents
- Logic Express 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Express
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
8
139
8 JLCooper FaderMaster 4/100
What You Will Need
You need one or more FaderMaster 4/100 (MIDI or USB version) units with firmware
version 1.03 or higher.
Important: If you have older firmware (see the sticker on the back of the unit), please
contact JLCooper.
Setting Up Your JLCooper FaderMaster 4/100
Please follow these steps before using your Faster Master 4/100 control surface with
Logic Express.
 USB model only: Install the software that ships with the FaderMaster 4/100.
 Ensure that your FaderMaster 4/100 units are connected to the computer via USB or
MIDI.
Note: USB units are installed automatically.
To install units connected via MIDI:
1 Choose Logic Express > Preferences > Control Surfaces > Setup.
2 Choose New > Install in the Setup window’s local menu.
3 Select the FaderMaster 4/100 from the list in the Install window.
4 Click the Scan button.
Note: You can combine several FaderMaster 4/100 units to form one large virtual
control surface. The meaning/functionality of the Track buttons, however, are
individually switched for each unit.