8

136 Chapter 7 JLCooper CS-32 MiniDesk
Channel Strips
Bank Button
Control Assignment
PAN SELECT/TRACK
SELECT
Selects channel strip (destination for the selected track).
SOLO Enables/disables Solo.
LOCATE Moves playhead to markers 1 to 32.
SHIFT LOCATE 17: Creates a new marker.
LOCATE 18: Creates a new marker without rounding.
LOCATE 19: Deletes the marker at the playhead position.
LOCATE 25: Opens the Marker List.
LOCATE 26: Opens the Marker Text window.
LOCATE 28: Sets locators by previous marker.
LOCATE 29: Sets locators by current marker.
LOCATE 30: Sets locators by next marker.
LOCATE 31: Moves playhead to previous marker.
LOCATE 32: Moves playhead to next marker.
MUTE Enables/disables Mute.
F1 Automation Enable setup (display shows “AE”).
MUTE 1: Enables/disables volume automation.
MUTE 2: Enables/disables pan automation.
MUTE 3: Enables/disables mute automation.
MUTE 4: Enables/disables automation of solo.
MUTE 5: Enables/disables send (level) automation.
MUTE 6: Enables/disables automation of plug-in parameters.
F2 Switches automation mode between Read and Off (display shows “Td”).
F3 Switches automation mode between Touch and Off (display shows “Tc”).
F4 Switches automation mode between Latch and Off (display shows “Lt”).
F5 Switches automation mode between Write and Off (display shows “Wr”).
ARM Activates/deactivates Record Enable button.
Faders Control volume. As the faders don’t offer feedback, pickup mode is used, as per
the pots. See the pickup information in the Pots section on page 134.
Control Assignment
(Small red button
with green LED)
LED off: Black labels of channel strip buttons apply (TRK/LOC/ARM).
LED on: White labels of channel strip buttons apply (PAN/SOLO/MUTE).