8

130 Chapter 6 Frontier Design TranzPort
Assignment Overview
A SHIFT (or other modifier) shown below a button description indicates that the button
has an alternate meaning, while holding down this modifier.
Channel Strip
Master Section
Control Assignment
<CHAN Shifts the currently displayed channel to the left—by one channel.
SHIFT Shifts the currently displayed channel left—by eight channels.
CHAN> Shifts the currently displayed channel right—by one channel.
SHIFT Shifts the currently displayed channel right—by eight channels.
REC Activates/deactivates the Record Enable button of the currently displayed
channel.
SHIFT Disables the Record Enable buttons of all channels.
SOLO Enables/disables Solo for the currently displayed channel.
SHIFT Disables Solo for all channels.
MUTE Enables/disables Mute for the currently displayed channel.
SHIFT Disables Mute for all channels.
ANY SOLO Lit if any tracks, channels, or regions are soloed.
UNDO Undo
SHIFT Redo
Control Assignment
SHIFT Modifier that alters the function of other controls.
IN Moves playhead to left cycle locator.
PUNCH Engages Autopunch mode, and sets punch in locator to playhead position.
LOOP Engages Cycle mode, and sets left cycle locator to playhead position.
OUT Goes to right cycle locator.
PUNCH Engages Autopunch mode, and sets punch out locator to playhead position.
LOOP Engages Cycle mode, and set right cycle locator to playhead position.
PUNCH Enables/disables Autopunch mode.
LOOP Enables/disables Cycle mode.
PREV Moves playhead to previous marker.
SHIFT Sets locators by previous marker.
ADD Creates marker at playhead position.
SHIFT Deletes marker at playhead position.
NEXT Moves playhead to next marker.
SHIFT Sets locators by next marker.