8

124 Chapter 5 CM Labs Motormix
Rotary Pots
Control Assignment
Rotary pots
1 to 8
Control parameter chosen with the Rotary Selector, as displayed in the 7 segment
display (see below).
7 segment
display
Shows current selection for rotary pots:
Send/EQ editing (S-MUTE or PRE/PST LED is on):
 S1 to S8 = Send 1 to 8 level
 F1 to F8 = EQ band 1 to 8 frequency
 G1 to G8 = EQ band 1 to 8 gain
 q1 to q8 = EQ band 1 to 8 Q factor
Pan editing (select LED is on):
 Pn = Pan
Channel parameter editing (eff-4 LED is on):
 VL = Volume
 Pn = Pan
 FM = Channel input format
 In = Channel input assignment
 Ou = Channel output assignment
 Au = Automation mode
 Gr = Group membership
Assignment:
 d1 to d8 = Assign Send 1 to 8 destination
Effect editing (DSP/compare LED is on):
 P1 to 15 = Assign Insert slot 1 to 15 to effect.
 P1. to 15. = Effect parameter editing
Instrument editing (DSP/compare LED is on):
 IA = Assign instrument to Instrument slot.
 IE. = Instrument parameter editing
Group property editing (group LED is on):
 G1 to 32 = group number
Rotary
Selector
Selects a slot or parameter for rotary encoders, depending on the parameter types
being edited with the rotary encoders:
 Send slot when editing send level or assigning send destination.
 EQ band when editing an EQ parameter.
 Effect/Instrument slot when assigning an effect or instrument.
 Pan.
 Channel parameter when editing a channel parameter.
 Effect/instrument parameter page when editing an effect or instrument plug-in.
Rotary
Selector
push button
Switches Flip mode between Off and Duplicate (faders mirror the rotary encoder
assignments).
SHIFT Switches the channel strip display mode between:
 Page info in upper line, parameter name in lower line.
 Parameter name in upper line, parameter value in lower line.