8
Table Of Contents
- Logic Express 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Express
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
118 Chapter 4 M-Audio iControl
Assignment Overview
The following assignment tables show all assignments for each control—with and
without the Option button (for the Assignment buttons and channel strip controls)—or
the Cycle button (for the Jog Wheel and Transport buttons) being pressed.
Assignment Buttons
The Assignment buttons in the All Tracks and Selected Tracks area defines the behavior
of the channel strip controls.
Channel Strip Controls (x8)
iControl button Modifier Function/Comments
Volume — Encoders control channel’s Level fader.
Pan — Encoders control channel’s Pan/Balance control.
Generator — Encoders control software instrument parameters.
Track Info — Encoders control channel strip parameters.
EQ — Encoders control EQ parameters.
Effect 1 — Encoders control Insert 3 parameters.
Effect 2 — Encoders control Insert 4 parameter.
Option — Modifier for other controls; while held down, the modified control
either: applies the function to all channel strips—or sets the
parameter to its minimum, default, or maximum value.
Arrow Up/Down — Shift fader bank left/right by number of channel strips.
Option Shift fader bank to first or last group of channels in the project.
iControl Modifier Function/Comments
Encoder — Modify currently selected parameter.
Option Sets parameter to minimum, default, or maximum value.
Record Enable — Activates/Deactivates Record Enable button of channel strip.
Option Disables Record Enable buttons of all channel strips.
Solo — Activates/Deactivates Solo button of channel strip.
Option Disables Solo buttons of all channel strips.
Mute — Activates/Deactivates Mute button of channel strip.
Option Disables Mute buttons of all channel strips.
Sel — Select channel strip, except in Channel view.