8

4
111
4 M-Audio iControl
This chapter introduces you to using the M-Audio iControl
with Logic Express.
Use of the iControl in Logic Express provides full compatibility with GarageBand
projects. When you open a GarageBand project in Logic Express, you can edit it (using
the iControl) in exactly the same manner as in GarageBand. You can also take full
advantage of the greater control, editing, and processing power afforded by
Logic Express.
Given the hugely expanded functionality of Logic Express over GarageBand, some
iControl buttons may not be assigned as you might expect. You can, however, easily
reassign iControl buttons in the Controller Assignments window. For more information,
see “Customizing Controller Assignments” on page 37.
Setting Up Your iControl
When you connect the iControl to any of your computer’s USB ports, Logic Express
automatically detects the device. If any channels are muted, soloed, or record-enabled
in the current project, the LED on the corresponding channel strip control is lit—to
reflect the channel strip’s status. If Cycle mode is active, a lit LED also indicates this.
Editing Plug-in Parameters
In addition to editing volume, pan, and other channel strip functions, the iControl can
edit any plug-in that can be automated in Logic Express. Many Logic Express effect and
instrument plug-ins, and those of third-party manufacturers, feature dozens of
parameters. You can access each of these parameters with the iControl.
Should you find that a third-party plug-in does not support remote editing, or other
features mentioned in this document, please contact the plug-in manufacturer to
obtain an updated version.