9
Table Of Contents
- Logic Express 9 Effects
- Contents
- An Introduction to the Logic Express Effects
- Amps and Pedals
- Amp Designer
- Choosing an Amp Designer Model
- Tweed Combos
- Classic American Combos
- British Stacks
- British Combos
- British Alternatives
- Metal Stacks
- Additional Combos
- Building a Customized Amp Designer Combo
- Choosing an Amp Designer Amplifier
- Choosing an Amp Designer Cabinet
- Amp Designer Cabinet Reference Table
- Using Amp Designer’s Equalizer
- Amp Designer Equalizer Type Reference Table
- Using Amp Designer’s Gain, Presence, and Master Controls
- Getting to Know Amp Designer’s Effects Parameters
- Using Amp Designer’s Reverb Effect
- Amp Designer Reverb Type Reference Table
- Using Amp Designer’s Tremolo and Vibrato Effects
- Setting Amp Designer Microphone Parameters
- Setting Amp Designer’s Output Level
- Bass Amp
- Guitar Amp Pro
- Building Your Guitar Amp Pro Model
- Choosing a Guitar Amp Pro Amplifier
- Choosing a Guitar Amp Pro Speaker Cabinet
- Choosing a Guitar Amp Pro Equalizer
- Using Guitar Amp Pro’s Gain, Tone, Presence, and Master Controls
- Getting to Know Guitar Amp Pro’s Effects Section
- Using Guitar Amp Pro’s Tremolo and Vibrato Effects
- Using Guitar Amp Pro’s Reverb Effect
- Setting Guitar Amp Pro Microphone Parameters
- Setting the Guitar Amp Pro Output Level
- Pedalboard
- Amp Designer
- Delay Effects
- Distortion Effects
- Dynamics Processors
- Equalizers
- Filter Effects
- AutoFilter
- EVOC 20 Filterbank
- EVOC 20 TrackOscillator
- What Is a Vocoder?
- How Does a Vocoder Work?
- Getting to Know the EVOC 20 TrackOscillator Interface
- EVOC 20 TrackOscillator Analysis In Parameters
- Using EVOC 20 TrackOscillator Analysis In Parameters
- EVOC 20 TrackOscillator U/V Detection Parameters
- EVOC 20 TrackOscillator Synthesis In Parameters
- Basic Tracking Oscillator Parameters
- Tracking Oscillator Pitch Correction Parameters
- Quantizing the Pitch of the Tracking Oscillator
- EVOC 20 TrackOscillator Formant Filter Parameters
- Using Formant Stretch and Formant Shift
- EVOC 20 TrackOscillator Modulation Parameters
- EVOC 20 TrackOscillator Output Parameters
- Fuzz-Wah
- Spectral Gate
- Imaging Processors
- Metering Tools
- Modulation Effects
- Pitch Effects
- Reverb Effects
- Specialized Effects and Utilities
- Utilities and Tools
Bass Amp
Bass Amp simulates the sound of several famous bass amplifiers. You can route bass
guitar and other signals directly through the Bass Amp, reproducing the sound of your
musical part played through a number of high-quality bass guitar amplification systems.
Bass Amp offers the following parameters.
• Model pop-up menu: Includes the following amplifier models:
• American Basic: 1970s-era American bass amp, equipped with eight 10" speakers.
Well-suited for blues and rock recordings.
• American Deep: Based on the American Basic amp, but with strong lower-mid
frequency (from 500 Hz on) emphasis. Well-suited for reggae and pop recordings.
• American Scoop: Based on the American Basic amp, but combines the frequency
characteristics of the American Deep and American Bright, with both low-mid (from
500 Hz) and upper-mid (from 4.5 kHz) frequencies emphasized. Well-suited for funk
and fusion recordings.
• American Bright: Based on the American Basic amp, this model emphasizes the
upper-mid frequencies (from 4.5 kHz upward).
• New American Basic: 1980s-era American bass amp, well-suited for blues and rock
recordings.
• New American Bright: Based on the New American Basic amp, this model strongly
emphasizes the frequency range above 2 kHz. Well-suited for rock and heavy metal.
30 Chapter 1 Amps and Pedals