8
Table Of Contents
- Logic Express 8 Instruments and Effects
- Contents
- Introduction to the Logic Express Plugins
- Amp Modeling
- Delay
- Distortion
- Dynamics
- EQ
- Filter
- Imaging
- Metering
- Modulation
- Pitch
- Reverb
- Specialized
- Utility
- EVOC 20 PolySynth
- EFM1
- ES E
- ES M
- ES P
- ES1
- ES2
- The ES2 Parameters
- Tutorials
- Sound Workshop
- Sound Design From Scratch, Filter Settings, Digiwaves
- Three Detuned Sawtooth Oscillators and Unison Mode
- Extremely Detuned Monophonic Analog Sounds, Effects
- Clean Bass Settings With One Oscillator Only
- Distorted Analog Basses
- FM Intensity and Frequency
- Controlling FM Intensity by an Envelope and FM Scaling
- FM With Drive and Filter-FM
- FM With Digiwaves
- FM With Wavetables
- Distorted FM in Monophonic Unison
- FM With Unusual Spectra
- Slow and Fast Pulse Width Modulations With Oscillator 2
- Pulse Width Modulation With Two Oscillators, PWM Strings
- Ring Modulation
- Oscillator Synchronization
- First Steps in Vector Synthesis
- Vector Synthesis—XY Pad
- Vector Synthesis Loops
- Bass Drum With Self-Oscillating Filter and Vector Envelope
- Percussive Synthesizers and Basses With Two Filter Decay Phases
- Templates for the ES2
- Sound Workshop
- EXS24 mkII
- Learning About Sampler Instruments
- Loading Sampler Instruments
- Working With Sampler Instrument Settings
- Managing Sampler Instruments
- Searching for Sampler Instruments
- Importing Sampler Instruments
- Parameters Window
- The Instrument Editor
- Setting Sampler Preferences
- Configuring Virtual Memory
- Using the VSL Performance Tool
- External Instrument
- Klopfgeist
- Ultrabeat
- GarageBand Instruments
- Synthesizer Basics
- Glossary
- Index
7
91
7 Imaging
You can use the Logic Express Imaging plug-ins to extend
the stereo base of a recording, and to alter perceived signal
positions.
These effects enable you to make certain sounds, or the overall mix, seem wider and
more spacious. You can also alter the phase of individual sounds within a mix, to
enhance or suppress particular transients.
The following sections describe the Imaging plug-ins included with Logic Express:
 “Direction Mixer” on page 91.
 “Stereo Spread” on page 94.
Direction Mixer
You can use the Direction Mixer plug-in to decode middle and side (MS) audio
recordings (see “What Is MS?” on page 93), or to spread the stereo base of a (left/right)
recording, and determine its pan position.
 Input buttons: Use the LR or MS buttons to determine whether the input signal is a
standard left/right signal, or if you’re dealing with an MS encoded (middle and side)
signal.
 Spread slider and field: Determines the spread of the stereo base.
 Direction knob and field: Determines the direction from which the middle of the
recorded stereo signal will emanate from within the mix, or in less complicated
terms, its pan position.