8
Table Of Contents
- Logic Express 8 Instruments and Effects
- Contents
- Introduction to the Logic Express Plugins
- Amp Modeling
- Delay
- Distortion
- Dynamics
- EQ
- Filter
- Imaging
- Metering
- Modulation
- Pitch
- Reverb
- Specialized
- Utility
- EVOC 20 PolySynth
- EFM1
- ES E
- ES M
- ES P
- ES1
- ES2
- The ES2 Parameters
- Tutorials
- Sound Workshop
- Sound Design From Scratch, Filter Settings, Digiwaves
- Three Detuned Sawtooth Oscillators and Unison Mode
- Extremely Detuned Monophonic Analog Sounds, Effects
- Clean Bass Settings With One Oscillator Only
- Distorted Analog Basses
- FM Intensity and Frequency
- Controlling FM Intensity by an Envelope and FM Scaling
- FM With Drive and Filter-FM
- FM With Digiwaves
- FM With Wavetables
- Distorted FM in Monophonic Unison
- FM With Unusual Spectra
- Slow and Fast Pulse Width Modulations With Oscillator 2
- Pulse Width Modulation With Two Oscillators, PWM Strings
- Ring Modulation
- Oscillator Synchronization
- First Steps in Vector Synthesis
- Vector Synthesis—XY Pad
- Vector Synthesis Loops
- Bass Drum With Self-Oscillating Filter and Vector Envelope
- Percussive Synthesizers and Basses With Two Filter Decay Phases
- Templates for the ES2
- Sound Workshop
- EXS24 mkII
- Learning About Sampler Instruments
- Loading Sampler Instruments
- Working With Sampler Instrument Settings
- Managing Sampler Instruments
- Searching for Sampler Instruments
- Importing Sampler Instruments
- Parameters Window
- The Instrument Editor
- Setting Sampler Preferences
- Configuring Virtual Memory
- Using the VSL Performance Tool
- External Instrument
- Klopfgeist
- Ultrabeat
- GarageBand Instruments
- Synthesizer Basics
- Glossary
- Index
Chapter 3 Distortion 31
Distortion II
Distortion II emulates the distortion effect section of a Hammond B3 organ. You can
use it on musical instruments to recreate this classic effect, or use it creatively when
designing new sounds.
Distortion II Parameters
.
 PreGain dial: Sets the amount of gain applied to the input signal.
 Drive dial: Sets the amount of saturation applied to the signal.
 Tone dial: Sets the frequency at which the signal is filtered. Filtering the
harmonically-rich distorted signal produces a somewhat less grating, softer tone.
 Type pop-up menu: Choose the type of distortion you want to apply. The choices are:
Growl, Bity, and Nasty.
 Growl: Emulates a two-stage tube amplifier, similar to the type found in a Leslie
122 model, often used together with a Hammond B3 organ.
 Bity: Emulates the sound of a bluesy (overdriven) guitar amp.
 Nasty: Produces hard distortion, suitable for creating very aggressive sounds.