8

22 Chapter 2 Delay
Echo
This simple echo effect always synchronizes the delay time to the project tempo,
allowing you to quickly create echo effects that run in time with your composition.
Echo Parameters
 Time: Sets the grid resolution of the delay time in musical note durations—based on
the project tempo. “T” values represent triplets, “.” values represent dotted notes.
 Repeat: Determines how often the delay effect is repeated.
 Color: Sets the harmonic content (color) of the delay signal.
 Wet and Dry: These individually control the amount of original and effect signal.
Sample Delay
The Sample Delay is not so much an effect as a tool: You can use it to delay a channel
by single sample values. When used in conjunction with the phase inversion
capabilities of the Gain effect, the Sample Delay is well-suited to the correction of
timing problems that may occur with multi-channel microphones. It can also be used
creatively, to emulate stereo microphone channel separation.
The stereo version of the plug-in provides separate controls for each channel, and also
offers a Link L & R option that moves both channels by the same number of samples.
Every sample (at a frequency of 44.1 kHz) is equivalent to the time taken for a sound
wave to travel 7.76 millimeters. Looked at differently: If you delay one channel of a
stereo microphone by 13 samples, this will emulate an acoustic (microphone)
separation of 10 centimeters.