User manual

3.8 Smaart System Check Wizards
(StudioLive 16.4.2 and 24.4.2 only)41
3.8.1 Smaart Room Analysis Wizard43
3.8.2 Smaart System Delay Wizard47
3.8.3 Smaart Output Check Wizard51
3.8.4 Go Remote52
3.8.5 Mic Position53
3.8.6 System Alignment Rules55
3.8.7 Using the Trace: Spotting the Trend56
4 StudioLive Remote for iPad60
4.1 Networking your iPad and Computer60
4.1.1 STEP 1: Creating an Ad Hoc Network
on your Computer60
4.1.2 STEP 2: Connect your iPad to
your Ad Hoc Network62
4.1.3 STEP 3: Connecting to Virtual StudioLive
and StudioLive Mixers63
4.2 Overview Page64
4.2.1 Bus Assignments Query64
4.2.2 Fat Channel Microviews
and Zooms64
4.2.3 Channel Controls65
4.2.4 Masters Overview
and Masters Section Page66
4.3 Aux Mix Page66
4.3.1 Aux Mix Select and Aux Mixing 67
4.3.2 FX Mix Select and FX Bus Mixing67
4.3.3 FX Edit68
4.4 GEQ Page69
4.5 Scenes Page70
4.6 Settings Page71
4.6.1 Launching Smaart System
Check Wizards Remotely72
4.7 Channel Zoom Page73
5 QMix for iPhone
and iPod touch74
5.1 Networking your iPhone or iPod touch and
Computer74
5.1.1 Step 1: Creating an Ad Hoc Network on
your Computer74
5.1.2 Step 2: Connect your iPhone/iPod Touch
to your Ad Hoc Network75
5.1.3 Step 3: Connecting QMix
to StudioLive Mixers76
5.2 Aux Mix Page77
5.3 Wheel of Me78
5.4 Settings Page79
6 Capture80
6.1 Start Page80
6.2 The Session Page81
6.2.1 Transport82
6.2.2 Meter Bridge83
6.2.3 Editing Tools84
6.2.4 The Edit Window86
6.3 Creating a New Capture Session87
6.4 Recording in Capture88
6.4.1 Monitoring Live Inputs88
6.4.2 Setting Input Levels88
6.4.3 Capture Main Source Selection
(StudioLive 16.4.2 and 24.4.2 only)
89
6.5 Capture Session Navigation89
6.5.1 Scrolling89
6.5.2 Timeline Zooming89
6.5.3 Using Markers90
6.6 Mixing Your Session91
6.6.1 Creating a Mix in Capture91
6.6.2 Mixing a Capture Session
in Studio One92
6.6.3 Mixing a Capture Session in
a Different Recording Application92