Specifications

Flowcharts and TablesTroubleshooting
No
Go to LaserWriter
Select 310 Flowchart 2.
Does the
Ready LED glow
steadily after
warmup?
Yes
1. Connect the printer to a Macintosh computer that
is using the LaserWriter Select 310 driver.
2. Open the printer and remove any paper jams.
3. Install the toner cartridge and fill the cassette tray.
4. Switch on the printer and the Macintosh computer
and wait 2 minutes.
Open the File menu and choose Print
Window or Print Directory.
No
Does the
printer print
from a
Macintosh?
Yes
No
Is the
print quality
OK?
Yes
Go to "Print Quality
Problems."
1. Place paper on the manual feed tray.
2. Open the File menu and choose Print Window
or Print Directory.
3. Select Manual Feed as the paper source in the
Print dialog box.
No
Yes
Go to Table 30,
No Paper Pickup From
Manual Feed or
Multipurpose Tray.
Does the
printer deliver
a manually fed
page?
The printer is fully functional.
Go to Table 7
or 8, depending
on the specific I/O
board error.
START
LaserWriter Select 310 Flowchart 1