User`s guide

2
2
2
222
2
Flowcharts and Tables Troubleshooting
Are all
LEDs off?
Are
the toner-out
and paper-jam LEDs
flashing?
Is the toner
LED on or
flashing?
Is the paper-out
LED on?
Is the paper-jam
LED on?
If the ready LED flashes without
stopping, disconnect the printer from
the computer, and see if the problem
persists. If you have just performed
the printer diagnostic (see the
"Printer Diagnostic" topic),
confirm that the serial loopback
connector has been removed from the
serial port.
Go to Table 2.
Go to Table 3.
Go to Table 4.
Go to Table 5.
Perform the EPOST
procedure (see the
"Printer Diagnostic"
topic).
Yes
Yes
Yes
Yes
Yes
A
No
No
No
No
No