User`s guide

Take Apart Envelope Feeder Cable - 129
1 Remove the cabling from the entire length of its
retaining channel in the right pickup block.
Note: If you are replacing the feeder cable without replacing
the feeder cable mount, skip to step 7.
2 Note: The opening guide is the rounded metallic plate
with the green knob at its far end. The opening guide
hinges around a ring connection at the knob end and an
open grip connection at the near end.
Swing the opening guide upward about 90°, free the grip
connection, and pull the guide up and out of the pickup
block.
3 Disconnect the grounding spring from the pickup block.