Technical information

5From the Printer Configuration menu, use the arrow keys to highlight “Print queues
assigned” and press Enter.
The Print Queue list appears.
6Press the Ins key to display print queues in your current context in the NetWare
Directory Services tree.
For this example, you will create a new queue.
7Press the Ins key to create a new print queue in the NetWare Directory Services tree.
The context listed at the top of the screen should still list the server’s bindery
context that was set earlier. If it doesn’t, change to the correct context first
before creating the print queue.
8At the prompt, type the new queue name and press Enter.
You are asked for the NetWare volume on which to store your NetWare print
queue jobs. With NetWare 4.xx, the NetWare queue does not have to exist on
the SYS volume. You can place the queue on any volume you choose. Use the
Ins key to select the volume from the directory tree. You may need to navigate
to a different context to select the volume desired.
9Select the name of the queue you specified in the previous step and press Enter.
This adds the queue to the Print Queue list of Printers.
10 Press the Esc key until you are prompted to save your changes.
Setting your printer to RPRINTER mode
1 Start Windows, if it’s not already running.
2 Open the Apple LaserWriter Software program group and double-click the Apple
LaserWriter Utility icon.
3Select the printer to configure and click OK.
4Choose Print Server Configuration from the Network menu.
5Click the printer you want, then click Configure.
Use the printer’s NetWare printer name to identify the printer to configure.
6Click Remote Printer.
81
Setting Up the Printer for Windows, DOS, and NetWare Users