Technical information

From a Windows 3.1 computer
You can create floppy disk copies of the printer software by using the standard
features of Microsoft Windows 3.1.
1 Open the File Manager.
2 Insert the CD-ROM disc into the CD-ROM drive.
3 Insert a blank floppy disk into the A: drive (or B: drive).
4From the File Manager, open the WIN_OS\WIN_31\APPLE\DISK1 directory on the CD.
5Choose Copy from the File menu.
6Type *.* in the Source field and A: (or B: ) in the Destination field.
The files are copied to the floppy disk.
7 Repeat steps 3 through 6 using the WIN_OS\WIN_31\APPLE\DISK2 directory.
Installing from the floppy disks
Installing on a Windows 95 computer
1 Find the Windows disks containing the printer software and make sure they’re write-
protected.
Slide up the write-protection tab in one corner of the floppy disk so that you
can see through the hole.
2 Start Windows 95.
Before installing the software, make sure the Windows control panel and
Printer folder are closed.
3 Insert LaserWriter Disk 1 for Windows 95 into a floppy disk drive.
Note: If you are installing from disks made from the CD, the floppy disk
labels may be different.
4Click the Start icon on the Task-Bar and select Run.
59
Setting Up the Printer for Windows, DOS, and NetWare Users