Technical information

Completing your installation on a Windows NT 3.5 computer
1Double-click the Print Manager icon in the Main group.
The Print Manager window appears.
2Choose Create Printer from the Printer menu.
The Create Printer window appears.
3Type the printer’s name as you want it to appear in the Print Manager window and in
your application’s Print dialog box.
4Select Other from the Driver pop-up menu.
The Install Driver window appears.
5Select the drive that holds your CD from the Drives list box and click OK.
6Select LaserWriter 8500 from the list and click OK.
Files are copied to your hard disk and the Create Printer window appears
again.
7Click OK.
The PostScript Printer Setup window appears.
8Click OK.
Installation is complete.
9Choose how to proceed:
For users connected via the parallel cable, the default printer driver settings
should suffice.
For instructions on using the Apple LaserWriter Utility for Windows, see
Appendix A.
To configure your printer software with NetWare, see “Initial Novell NetWare
4.1 Setup,” later in this chapter.
57
Setting Up the Printer for Windows, DOS, and NetWare Users