Technical information

Completing your installation on a Windows NT 4.0 computer
The Add Printer Wizard window appears and lets you specify how your
printer is connected (local or network).
1Select how your printer is connected (local or network) and click Next.
2If your printer is connected locally, select the port to assign to the printer and click Next.
The printer manufacturer and model window appears.
3Select Apple as the manufacturer and LaserWriter 8500 as the printer model.
Files are copied to your hard disk.
4 Name your printer and select other options as necessary.
5Click Next.
6Select whether the printer is to be shared on the network.
7If the printer is to be shared, type the printer’s shared name and select the operating
systems of all computers that will be printing on this printer.
The Add Printer Wizard appears and lets you print a test page if you want.
8Select Yes and click Finish.
A test page is printed.
Installation is complete.
9Choose how to proceed:
For users connected via the parallel cable, the default printer driver settings
should suffice.
To configure your printer software for TCP/IP, see “Initial TCP/IP Setup”
later in this chapter.
For instructions on using the Apple LaserWriter Utility for Windows, see
Appendix A.
To configure your printer software with NetWare, see “Initial Novell NetWare
4.1 Setup,” later in this chapter.
56
Chapter 3