Technical information

Installing from the floppy disks
To i n s t a ll the printer software on a Mac OS–based computer, follow these
steps:
1 Quit any programs that are open.
2 Turn off any automatic virus-detection programs you have on your computer.
If you don’t, problems may occur during the installation. After installation is
complete, you can turn the virus-detection programs back on. (For
instructions on turning off each virus-detection program, see the manual that
came with the program, or telephone the manufacturer of the program.)
3Make sure the disks are locked.
4 Insert the first floppy disk into a disk drive.
The disk’s icon appears on the desktop.
Note: If you are installing from floppy disks made from the CD-ROM disc,
the floppy disk label may be different.
5Double-click the disk icon to open the disk, if necessary.
6 Read the Before You Install file to check for late-breaking news.
7Double-click the Installer icon to start the Installer program.
After a moment, a Welcome dialog box appears.
8Click Continue.
After a moment, the License Agreement dialog box appears.
33
Setting Up the Printer for Mac OS Users