Technical information

4Choose the port settings you want.
m You can set LocalTalk interface to PostScript mode or turn it off.
m You can set the EtherTalk interface to PostScript mode or turn it off.
m You can set the NetWare interface to PostScript mode or turn it off.
m You can set the TCP/IP interface to PostScript mode or turn it off.
m You can set the Parallel interface to PostScript mode or turn it off. You can
also set the Parallel protocol to normal or TBCP.
IMPORTANT If you activate or deactivate the EtherTalk, NetWare, or TCP/IP
interface, the change does not take effect until the printer is restarted.
5Click Send to send the communication configuration settings to the printer.
Resetting the communication settings
To restore the communication settings to the factory defaults:
1Set the communication switch on the printer to the Reset (out) position.
2 Turn the printer off and back on again.
3Set the communication switch on the printer to the Normal (in) position.
Sending PostScript files to the printer
You can download PostScript files to the printer to print a PostScript program
or to run a PostScript program to change the internal settings of the printer.
You can create a PostScript file in a variety of text-editing programs or by
printing any document to a file (click the File button in the Print dialog box).
1Choose Send PostScript File from the Utilities menu.
The Send File dialog box is displayed for the currently selected printer.
2Select the PostScript file that you want to send to the printer.
3Click Add.
4Click Send.
240
Appendix A