Technical information

3Choose a default paper size for the multipurpose tray from the pop-up menu.
The Print dialog box provides the Auto Select option, which allows the printer
to draw paper from any paper source that holds the correct size paper.
Similarly, the automatic tray switching feature allows the printer to select
another paper source that holds the correct size paper when a paper source
runs out. However, the printer is not able to detect the size of paper in the
multipurpose tray, so you must tell it. If the paper size for the multipurpose
tray is the same as the paper in the standard paper cassette (and automatic
tray switching is turned on), the printer automatically uses the multipurpose
tray as a paper source.
4Choose a default envelope size for the envelope tray from the pop-up menu, if the
envelope cassette option is installed.
5Choose printing on one side or both sides of the paper from the pop-up menu.
If you want the binding orientation along the side of the paper (as in a book
or magazine), choose “two-sided, no tumbling.” If you want the binding
orientation along the bottom of the paper (as in a calendar), choose “two-
sided, with tumbling.”
Note: You must have the optional duplex printing unit to print on both sides
of the paper.
The following table lists the memory requirements and supported paper sizes
for duplex printing and PhotoGrade:
Memory Duplex Printing PhotoGrade Use both features
at once?
16 MB Letter, A4, B4, legal Letter, A4, B5 No
20 MB Letter, A3, A4, B4, Up to ledger and A3 Yes; up to letter and
legal, ledger A4
24 MB Letter, A3, A4, B4, Up to Japan Standard Yes; up to legal
legal, ledger and Japan Larger
32 MB Letter, A3, A4, B4, All supported paper Yes; up to B4
legal, ledger sizes
48 MB Letter, A3, A4, B4, All supported paper Yes; all supported
legal, ledger sizes paper sizes
232
Appendix A