Technical information

2Click the checkboxes to turn the startup page or demonstration page on or off.
When an X appears in the checkbox, the printer is set to print the startup page
or the demonstration page.
Note: You must press the Ready/In Use light to print a demonstration page.
3Click Send to send the startup page setting to the printer.
Setting the print density
If your documents are printing too light or too dark, you can adjust the print
density of the printer (to a limited degree) to print lighter or darker text and
images.
1 Open the Print Density category.
The Print Density panel appears.
2 Drag the slider to increase or decrease the print density.
3Click Send to send the Print Density setting to the printer.
229
Configuring the Printer With the Printer Utilities