Technical information

2Adjust the guides to match your paper’s length or width and place the paper in

the tray.

Be sure not to adjust the guide so tightly against the stack that it causes

binding or rumpling of the paper.

3Close the multipurpose tray door.

Note: Some paper sizes may be too large to close the multipurpose tray door.

For these paper sizes, leave the multipurpose tray door open.

For more information on printing with the multipurpose tray, see Chapter 6 if

you have a Mac OS–based computer, or see Chapter 7 or Chapter 8 if you

have a DOS- or Windows-based computer.

Loading three-hole punched paper or letterhead paper in the multipurpose tray

Load three-hole punched paper face up, with the holes toward the front of the

multipurpose tray. Load letterhead paper face up, with the tops of the pages

toward the left side of the tray.

Slide the width guides so

that they rest against the paper.

Setting Up the LaserWriter 8500