Technical information

Downloading fonts manually to RAM or to the hard disk
Fonts need to be downloaded only once. Users who want to use fonts that
have already been downloaded should use the Job Control tab dialog box
(described earlier in this chapter) to turn on Do Not Download Fonts.
Otherwise, the fonts will be downloaded again, wasting time and system
resources.
1From the Program Manager, open the Control Panel.
2Double-click the Printers icon.
The Printers dialog box appears.
3If it is not already selected, select the printer from the Installed Printers list.
4Click Setup.
The Setup dialog box appears.
Note: You can also open the Setup dialog box from within many Windows
programs. Check your program documentation to see if you can change your
printer setup from within your program.
5Click Fonts.
6Click Font Downloader.
The Font Downloader dialog box appears.
7Select the destination from the Destination Memory list box.
8Select the fonts you want to download from the Fonts Available list.
Fonts that are already present in the printer’s ROM do not need to be
downloaded. For a list of these fonts, see Appendix D or print a list of font
samples by choosing Print Font Samples in the Apple LaserWriter Utility
for Windows.
9Click Download.
The Font Downloader informs you of its progress as it downloads fonts.
Note: While downloading, you can use other programs, but you can’t print.
158
Chapter 7