Technical information

Turning th e banner page on or off
The banner page feature prints an identification page at the beginning of each
document. The banner page is printed using the PostScript page-description
language.
To tur n th e ba nner page on or off for all jobs sent through the TCP/IP
interface, follow these steps:
1From the main menu of the TCP/IP Printer Configuration Utility menu, press 3 and Enter.
Tw o choices are displayed: one to turn the feature on, the other to turn it off.
2Type the number of your choice and press Enter.
Viewing or changing the printer’s IP address
You must initially set the the printer’s IP address using one of the methods
described in the section “Step 3: Assigning an IP Address to the Printer,”
earlier in this chapter. Subsequently, you can use the TCP/IP Printer
Configuration Utility to change the address or to store it permanently in the
printer’s nonvolatile memory.
1From the main menu of the TCP/IP Printer Configuration Utility menu, press 4 and Enter.
Tw o choices are displayed. The first choice—“Use Network Protocol”—sets
the IP address to
0.0.0.0. When the printer is restarted, it uses BOOTP
and RARP. The second choice is the equivalent of using the Apple Printer
Utility for Mac OS or the Apple LaserWriter Utility for Windows.
.2To change the address, press 2 and then Enter.
105
Setting Up the Printer for UNIX Workstations or TCP/IP Users