Specifications

CHAPTER 3
PostScript Level 1 Compatibility Operators
Paper Tray Compatibility Operators 79
Paper Tray Compatibility Operators 3
The paper tray operators are in the status dictionary statusdict . Each operator
requests a tray containing a specific paper size. The only difference between the
operators is the size of paper requested. The PageSize and ImagingBBox parameters
requested are the same as those for the corresponding page size operator. These
operators use the specified size as a page device PageSize parameter. All the operators
set the Policy for PageSize to 0 , which guarantees that a rangecheck error is
generated if a tray containing the requested paper size is not found. In addition,
a limitcheck error can occur if there is not sufficient memory for the imaging
area requested.
The paper tray compatibility operators and associated page sizes and imaging boundary
box parameters are shown in Table 3-1.
Compatibility Operator Descriptions 3
This section describes the compatibility operators that are not found, or that differ from
the operators described in the Compatibility chapter of the PostScript Language Reference
Manual Supplement for Version 2014 of the PostScript programming language.
Table 3-3 Paper tray compatibility operators
Operator Page size
Imaging
boundary box
a4tray [595 842] null
a5tray [420 595] null
b5tray [516 729] or [499 709] null
c5tray [461 648] null
com10tray [297 684] null
dltray [312 624] null
legaltray [612 1008] null
lettertray [612 792] null
monarchtray [279 540] null