Specifications

CHAPTER 2
LaserWriter 16/600 PS Software
64 Interpreter Parameters
FontSource integer 0 Selects the source of the desired
font. Currently, 0 selects an
internal font, and 1 selects a
downloaded font.
The value -1 is used when there is
to be no selection of a default font.
In this case, the obsolete method
of selection, described later in
this section, is used to select the
font source. This method uses
the parameters FontFixed,
FontItalic, FontWeight, and
FontTypeFace.
FontSymbolSet integer 277 This parameter is the equivalent
of the Symbol Set code. The
applicable values are described in
Hewlett-Packard manuals. Note
that this value is consulted only
if the font specified by the
combination FontSource and
FontNumber is an unbound font.
There are 35 legal values. See Table
2-22 for further information on
Symbol Set legal values.
FontTypeface integer 3 Describes the typeface, for exam-
ple, Times

, Helvetica, Palatino

,
and so on. The integer value,
which can be up to 16 bits, comes
from a table published by
Hewlett-Packard.
This is an obsolete parameter,
originally used to select the
default font. It is used only if
the FontSource parameter is
set to -1.
FontWeight integer 0 Specifies the weight or boldness of
the font. For example, -7 is very
light and +7 is very bold.
This is an obsolete parameter,
originally used to select the
default font. It is used only if
the FontSource parameter is
set to -1.
continued
Table 2-21 Parameters for the %LaserJetIII% emulator (continued)
Key Type Default Description