Specifications

CHAPTER 2

LaserWriter 16/600 PS Software

Interpreter Parameters 63

FontHeight integer 1200 Selects the height of the font and is

applicable to scalable proportional

fonts. The value set is the point

size, multiplied by 100 to avoid

ﬂoating point representation. For

instance, the default value 1200

speciﬁes a 12-point font.

Note that this value is used only

if the font speciﬁed by the

combination FontSource and

FontNumber is scalable and

proportional.

FontItalic boolean false If this parameter is true, an italic

or oblique font is requested.

This is an obsolete parameter,

originally used to select the default

font. This parameter is used only if

the FontSource parameter is set

to -1.

FontNumber integer -1 Selects the font within the current

FontSource. Applicable values

are determined based upon

FontSource and the number of

fonts that are available from that

font source. If the FontNumber

parameter speciﬁed is outside the

range, the value 0 is used instead.

FontPitch real 1000 Speciﬁes the number of characters

per inch to be used for monospace

scalable fonts. The value is

multiplied by 100 to avoid ﬂoating-

point representation. To select a

12-pitch font, you use the value

1200. This parameter is used only

by the PCL5 interpreter if the font

speciﬁed by the combination

FontSource and FontNumber is

scalable and monospace.

continued

Table 2-21 Parameters for the %LaserJetIII% emulator (continued)

Key Type Default Description